Osmo Spray Cleaner 500ml

Product Information

Airless/Airmix: Depending on the operation of the operator/machine, the equipment and the condition of the respective system as well as the type and shape of the workpieces to be treated. For stain removal, apply directly to the soiled area – for especially tough stains, use a cloth or scotchpad and wipe away loosened dirt. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Use mats at the outside of entrance doors to prevent unwanted dirt and grit being carried on your boots and shoes. In addition to this, it is no harm using interior door mats for the same purpose, you might even want to consider a built in matwell at your main entrance.

The second coat after applying Spray-Wax 3010 Natural depends on the desired surface results (trial application): Wood pre-treated with Osmo Wood Protector 4006 may appear a little more dark and colour intensified. Always trial apply Osmo Top Oil 3068 Natural over the Wood Protector 4006 to ensure the final appearance meets with expectations. RP (Reduced Pressure) Technology: Spray pressure approx. 1,6 – 2,0 bar, Nozzle approx. 1,6 – 1,8mm. For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.Damp clean with Osmo Spray-Mop which makes it really easy. The cleaning concentrate (Spray-Fix) effectively removes dirt without wear of treatment.

Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining.Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.

Shake very well before use. Failure to mix all ingredients ( and colour) could lead to an increased patchiness.Use floor protectors on the legs of furniture to avoid scraping or scratching. If your furniture has floor casters make sure that they are of the wide variety. If they are of the narrow metal variety, there are special plastic and velvet cups that can be used underneath. Be cautious when moving heavy objects such as electrical appliances and furniture. Always make sure you lift and never push or drag. If you cannot lift, slide a blanket or carpet under the objects to prevent scratching and gouging. Coat: with cup spray gun, RP Technology or Airless/Airmix Application amount is, among other things, dependant on the wood species and sanding grade etc, approx. Application of top coat of clear Osmo Polyx®-Oil Original can be carried out once the first coat has dried. However, if the first coat was a coloured Osmo finish ( eg Polyx®-Oil Tint or Wood Wax Finish Transparent) wait approx. 24hrs before applying Osmo Polyx®-Oil Original clear top coat. For top coating Osmo white colours use white tinted Polyx Oils ( eg: 3040 or 3240) to avoid yellowing.